Back to Support
Connectivity

Troubleshooting a Device That Won't Connect

When one device won't join the Guardian network, a short checklist solves almost every case. Here's the sequence to run through.

The quick sequence

  1. Confirm the password: Wi-Fi passwords are case-sensitive; retype rather than trust muscle memory from the old network.
  2. Forget the old network: devices cling to remembered networks. Have the device forget your previous Wi-Fi, then join Guardian fresh.
  3. Check the band: very old smart-home gear only connects to 2.4 GHz. Make sure it's joining that network, not the 5 GHz one.
  4. Restart the device's Wi-Fi: toggle airplane mode or Wi-Fi off and on — this fixes the majority of "sees the network but won't join" cases.
  5. Reboot the device: a full restart, not just sleep. Especially effective for smart TVs and consoles.

Still failing?

  • The device connects but has no internet: check the Devices page — if it was blocked or paused, that's your answer; unblock or resume it there.
  • The device joined but never appears in the list: some gadgets take a few minutes to surface; refresh after five.
  • Only one device out of many failing: that points at the device, not the gateway — check for a software update or a randomized-MAC quirk.

When to contact support

If the device rejects the correct password on the right band after a full restart, contact support with the device type and what the gateway's light is doing — that combination narrows the cause quickly.